Press start
The dishwasher will now start. It man- ages the entire wash automatically. Ensure that the door is properly closed or the ma- chine will not start.
The display shows ‘Program started’. If the door is open or not properly closed, ‘Close door’ appears in the display.
Changing program
If you wish to change the program after having started the machine, press the Start/ Stop button for three seconds. Then select a new program and press the Start/Stop but- ton again.
Do you want to load more dishes? Carefully open the door; the machine will stops automatically, put in the dishes, close the door and the dishwasher will continue from where it left off.
If the machine is switched off at the main switch
(or in the event of a power cut) before the washing program has been completed, the interrupted program will continue when the power comes back on.
NB!
If the power is switched off, or if the door is open during drying, the program is inter- rupted.
7 Standby mode
Once the machine has finished, it is drawing a very small amount of power. Disconnect the power by switch off at the main switch. Turn off the water tap if the machine is not to be used for an extended period, e.g. during holidays.
The indicators around the Start/Stop field gradually light up as the programme progresses.
When the programme finishes, all the indi- cators are lit, turning off 2 hours later.
Customer Care Center