RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the system.

3.3.4 IDE Configuration

BIOS SETUP UTILITY

Advanced

IDE Configuration

OnBoard IDE Operate Mode

[Enhanced Mode]

OnBoard IDE Controller

[Both]

Primary IDE Master

[Hard Disk]

Primary IDE Slave

[Not Detected]

Secondary IDE Master

[Not Detected]

Secondary IDE Slave

[Not Detected]

SATA1

[Not Detected]

SATA2

[Not Detected]

Set [Compatible Mode] when both Legacy OS (MS-DOS, Win Me / 98SE) and SATA device

are used.

Set [Enhanced Mode] when Native OS (Win 2000 / XP)

is used.

 

Select Screen

 

Select Item

+-

Change Option

F1

General Help

F9

Load Defaults

F10

Save and Exit

ESC

Exit

v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

OnBoard IDE Operate Mode

Please select [Compatible Mode] when you install legacy OS (Windows ME / 98SE) into SATA device. If you install legacy OS into IDE HDD while SATA devices are used, you also need to select [Compatible Mode].

If native OS (Windows 2000 / XP) is installed into SATA device, please select [Enhanced Mode]. You also need to select [Enhanced Mode] while native OS is installed into IDE HDD and SATA devices are used.

If you do not install any SATA device, please also select [Enhanced Mode] no matter you use legacy OS or native OS for the system.

Please note that the following options will be varied depending on the “OnBoard IDE Operate Mode” ([Compatible Mode] or [Enhanced Mode]) that you selected.

When [Enhanced Mode] is selected:

OnBoard IDE Controller

You may enable either the primary IDE channel or the secondary IDE channel. Or you may enable both the primary and the secondary IDE channels by selecting [Both]. Set to [Disabled] will disable the both. Configuration options: [Disabled], [Primary], [Secondary], [Both].

When [Compatible Mode] is selected

Combined Mode Option

It allows you to select between [Pri IDE + SATA] and [SATA + Sec IDE]. If it is set to [Pri IDE + SATA], then the secondary IDE will not work. Likewise, if it is set to [SATA + Sec IDE], then the primary IDE will not work.

2 9

Page 29
Image 29
ASRock 865PE IDE Configuration, RTC Alarm Power On, OnBoard IDE Operate Mode, OnBoard IDE Controller, Combined Mode Option