ASRock 970 Pro2 manual Storage Configuration, Onboard Sata Controller, Sata Operation Mode

3.4.4 Storage Configuration

	BIOS SETUP UTILITY
Advanced
		Configure onboard
Storage Configuration		serial ATA
		controller.
Onboard SATA Controller	[Enabled]
SATA Operation Mode	[AHCI]
SATA IDE Combined Mode	[Enabled]
IDE1 Master	[Hard Disk]
IDE1 Slave	[Not Detected]
SATAII_1	[Not Detected]
SATAII_2	[Not Detected]
SATAII_3	[Not Detected]		Select Screen
SATAII_4	[Not Detected]
			Select Item
SATAII_5	[Not Detected]
		+-	Change Option
SATAII_6	[Not Detected]
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Onboard SATA Controller

Use this item to enable or disable the “Onboard SATA Controller” feature.

SATA Operation Mode

Use this item to adjust Onboard SATA Operation Mode. The default value of this option is [AHCI]. Configuration options: [AHCI], [IDE] and [RAID].

If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports.

SATA IDE Combined Mode

This item is for SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports. Use this item to enable or disable SATA IDE combined mode. The default value is [Enabled].

If you want to build RAID on SATAII_5 (PORT 4) and SATAII_6 (PORT 5 ports, please disable this item.

43