ASRock 970 Pro2 manual OC Tweaker Screen

3.3 OC Tweaker Screen

In the OC Tweaker screen, you can set up overclocking features.

BIOS SETUP UTILITY

Main OC Tweaker Advanced H/W Monitor Boot Security Exit

EZ Overclocking

Load Optimized CPU OC Setting	[Press Enter]
CPU Configuration
Overclock Mode	[Auto]
CPU Frequency (MHz)	[200]
PCIE Frequency (MHz)	[100]
Spread Spectrum	[Auto]
Boot Failure Guard	[Enabled]
Boot Failure Guard Count	[3]
CPU Active Core Control	[All Cores]
AMD Turbo Core Technology	[Auto]
AMD C-State Support	[Enabled]
AMD APM	[Auto]
Processor Maximum Frequency	x31.5 6300 MHZ
North Bridge Maximum Frequency	x31.0 6200 MHz
Processor Maximum Voltage	1.5500 V
Multiplier/Voltage Change	[Auto]

Overclocking may cause damage to your CPU and motherboard.

It should be done at your own risk and expense.

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

EZ Overclocking

Load Optimized CPU OC Setting

You can use this option to load optimized CPU overclocking setting. Please note that overclocing may cause damage to your CPU and mother- board. It should be done at your own risk and expense.

CPU Configuration

Overclock Mode

Use this to select Overclock Mode. Configuration options: [Auto] and [Manual]. The default value is [Auto].

CPU Frequency (MHz)

Use this option to adjust CPU frequency.

PCIE Frequency (MHz)

Use this option to adjust PCIE frequency.

Spread Spectrum

This item should always be [Auto] for better system stability.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Use this item to configure Boot Failure Guard Count.

CPU Active Core Control

This allows you to adjust CPU Active Core Control feature. The configura- tion options depend on the CPU core you adopt. The default value is [All Cores].

AMD Turbo Core Technology

This item appears only when the processor you adopt supports this fea- ture. Use this to select enable or disable AMD Turbo Core Technology. Configuration options: [Auto] and [Disabled]. The default value is [Auto].

34