2.12 Dr. Debug
Dr. Debug is used to provide code information, which makes troubleshooting even easier. Please see the diagrams below for reading the Dr. Debug codes.
Status Code | Description |
00 | Please check if CPU is installed correctly and then clear CMOS. |
0d | Problem related to memory, VGA card and other devices. |
| Please clear CMOS, |
| USB, PCI devices. |
01 - 54 | Problem related to memory. Please |
(except 0d), | CMOS. |
5A- 60 | If the problem still exists, please install only one memory module or try using |
| other memory modules. |
55 | Memory could not be detected. Please |
| If the problem still exists, please install only one memory module or try using |
| other memory modules. |
61 - 91 | Chipset initialization error. Please press reset or clear CMOS. |
92 - 99 | Problem related to |
| installing them in other slots. |
| If the problem still exists, please remove all |
| another VGA card. |
A0 - A7 | Problem related to IDE or SATA devices. Please |
| devices. |
| If the problem still exists, please clear CMOS and try removing all SATA |
| devices. |
b0 | Problem related to memory. Please |
| If the problem still exists, please install only one memory module or try using |
| other memory modules. |
b4 | Problem related to USB devices. Please try removing all USB devices. |
b7 | Problem related to memory. Please |
| CMOS. |
| If the problem still exists, please install only one memory module or try using |
| other memory modules. |
d6 | VGA could not be recognized. Please clear CMOS and try |
| VGA card. |
| If the problem still exists, please try installing the VGA card in other slots or |
| using other VGA cards. |
d7 | Keyboard and mouse could not be recognized. Please try |
| keyboard and mouse. |
d8 | Invalid Password. |
FF | Please check if CPU is installed correctly and then clear CMOS. |
|
|
45
