ASRock A55M-DGS manual Driver Installation Guide, ATX Power Connector, RAID Installation Guide

ATX Power Connector	12	24
(24-pin ATXPWR1)
(see p.2 No. 7)
	1	13

Please connect an ATX power supply to this connector.

	Though this motherboard provides 24-pin ATX power connector,		12	24
	it can still work if you adopt a traditional 20-pin ATX power supply.
	To use the 20-pin ATX power supply, please plug your power
	supply along with Pin 1 and Pin 13.
		20-Pin ATX Power Supply Installation	1	13
ATX 12V Power Connector		Please connect an ATX 12V
(4-pin ATX12V1)		power supply to this connector.
(see p.2, No. 1)
Serial port Header		This COM1 header supports a
(9-pin COM1)		serial port module.
(see p.2 No.21)

2.10 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.

2.11 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit With RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit on your SATA / SATAII HDDs with RAID functions, please refer to the document at the following path in the Support CD for detailed procedures:

..\ RAID Installation Guide

25

English

ASRock A55M-DGS Motherboard