ASRock H61 Pro manual Onboard Headers and Connectors

2.9 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATAII Connectors

(SATA2_0: see p.13,		No. 12)	SATA2_0	SATA2_2
(SATA2_1: see	p.13,	No. 15)
(SATA2_2: see	p.13, No. 11)
(SATA2_3: see	p.13, No. 14)		SATA2_1	SATA2_3

These four Serial ATAII (SATAII) connectors support SATA data cables for internal storage devices. The current SATAII interface allows up to 3.0 Gb/s data transfer rate.

Serial ATA (SATA)							Either end of the SATA data
Data Cable							cable can be connected to the
(Optional)							SATA / SATAII hard disk or the
							SATAII connector on this
							motherboard.
USB 2.0 Headers							Besides six default USB 2.0
(9-pin USB6_7)							ports on the I/O panel, there
(see p.13 No. 18)							are two USB 2.0 headers on
							this motherboard. Each
							USB 2.0 header can support
							two USB 2.0 ports.
(9-pin USB8_9)		USB_PWR
			P-9
(see p.13 No. 17)				P+9
					GND
	1					DUMMY
					GND
				P+8
			P-8
		USB_PWR

Infrared Module Header		IRTX
		+5VSB
(5-pin IR1)		DUMMY
(see p.13	No. 13)	1
		GND
		IRRX

This header supports an optional wireless transmitting and receiving infrared module.

25