ASRock H77 Pro4/MVP manual Onboard Headers and Connectors

2.11 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA2 Connectors

(SATA2_2: see p.13, No. 17)

(SATA2_3: see p.13, No. 14)

(SATA2_4: see p.13, No. 13)

(SATA2_5: see p.13, No. 18)

SATA2 5	SATA2 4	SATA2 3
SATA2 2

These four Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate.

Serial ATA3 Connectors

(SATA3_0: see p.13, No. 15)

(SATA3_1: see p.13, No. 16)

(SATA3_A1: see p.13, No. 8)

(SATA3_A2: see p.13, No. 9)

	SATA3 A1
	SATA3 A2
SATA3 1	SATA3 0

These four Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

Serial ATA (SATA)

Data Cable

(Optional)

USB 2.0 Headers

(9-pin USB_6_7) (see p.13, No. 23)

Either end of the SATA data cable can be connected to the SATA / SATA2 / SATA3 hard disk or the SATA2 / SATA3 connector on this motherboard.

Besides six default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports.

32