Rev. A.2, 10/03 Page-i
WITH THE UNIT IN PROGRAM MODE (FAST YELLOW FLASH):
00 followed by 5-7 digits sets Program code
01 followed by 2-7 digits set first User code
02-followed by 2-7 digits sets second User code
Additional User codes can be set up to the prefix 59 (total 59 User codes)
70 will sound beeper when door is open (except toggle mode). Echo and prompt beeps are retained
71 will silence beeper at all times
72 will return beeper to factory set
73 will reverse light logic (red to echo, green to show door is open)
74 will return light logic to normal
75 will direct Hard code to programmable relay for duress (entering Hard code releases door and switches
programmable relay)
76 will transfer programmable relay to alarm function (16 wrong digits switches programmable relay as well as
locking out keypad for 30 seconds)
77 will transfer programmable relay to light function (relay operates for 5 seconds when any key is pressed.)
78 will return programmable relay to doorbell function.
79 is alternate code delete. Any valid code entered directly after the 79 command will be deleted
80 re-assigns the HCD terminal to anti-tailgating
81 re-assigns the UCD terminal to anti-tailgating
82 re-assigns the HCD terminal to door prop alarm
83 re-assigns the UCD terminal to door prop alarm
(Note the door prop alarm function automatically includes anti-tailgating)
84 returns either input to original (code disable) meaning
88 will erase all user codes (not Program or Hard code)
89 will return all functions (including timer) to factory set. Codes are unchanged.
Pressing 9 when in program mode sets the timer. Two digit codes must be entered from 01 to 99 seconds. Default
is 5 seconds. Entering 00 sets toggle mode.