12.USB connectors (10-1 pin USB56, USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

 

USB910

USB78

USB56

 

USB+5V USB P10- USB P10+ GND NC

USB+5V USB P8- USB P8+ GND NC

USB+5V USB P6- USB P6+ GND NC

P8Q77-M

1

 

1

 

1

 

 

PIN USB+5V

_

PIN USB+5V

_

PIN USB+5V

_

 

 

-P9 P9+ GND

 

-P7 P7+ GND

 

-P5 P5+ GND

 

 

USB

 

USB

 

USB

 

 

USB

 

USB

 

USB

P8Q77-M USB2.0 connector

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

13.USB 3.0 connector (20-1 pin USB3_34)

This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your chassis support customized front panel installation, with ASUS USB 3.0 header, you can have a front panel USB 3.0 solution.

USB3_34

P8Q77-M

P8Q77-M USB3.0 front panel connector

•The USB 3.0 module is purchased separately.

•Due to Intel® limitations, the USB3_34 only supports Windows® 7 operating system.

Chapter 1: Product introduction

1-29