Swing Control [Reduced]
Sets the execution of the PEG Swing Control on IVB C0 and later. Configuration options: [Reduced] [Half] [Full]
Gen3 Equalization [Enabled]
Enables or disables the execution of PEG Gen3 Equalization steps. Configuration options: [Disabled] [Enabled]
Gen3 Eq Phase 2 [Auto]
Sets the execution of the PEG Gen3 Equalization Phase 2. Configuration options: [Disabled] [Enabled] [Auto]
PEG Gen3 Root Port Preset Value for each Lane
Sets the Root Port Preset Value per lane for Gen3 Equalization.
Lane 0~15 [8]
Sets the value for each lane. Use the <+> and
PEG Gen3 Endpoint Preset Value for each Lane
Sets the Endpoint Preset Value per lane for Gen3 Equalization.
Lane 0~15 [8]
Sets the value for each lane. Use the <+> and
2.5.6Intel TXT(LT) Configuration
Secure Mode Extensions (SMX) [Enabled]
Allows you to enable or disable the Intel Secure Mode Extensions (SMX) technology. Configuration options: [Disabled] [Enabled]
Intel TXT(LT) Support [Disabled]
This item can be configured only when the Intel SMX, Intel Virtualization Technology (VT), and Intel Virtualization Technology for Directed I/O
2.5.7AMT Configuration
The items in this menu allow you to change the Intel® Active Management Technology (AMT) feature.
Intel AMT [Enabled]
Allow you to enable or disable the Intel® Active Management Technology (AMT) in the BIOS extension. Configuration options: [Enabled] [Disabled]
iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device.
Invoke MEBx [Disabled]
[Enabled] | Execute MEBx automatically. |
[Disabled] | Press <Ctrl+P> to invoke MEBx. |
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or set it to [Enabled] to use a password. Configuration options: [Enabled] [Disabled]
Chapter 2: BIOS information |