3.HARDWARE SETUP

10)USB Device Wake-up (USB01_PWR/USB23_PWR/USB45_PWR)

Set these jumpers to +5V to allow wake up from the S1 sleep state (CPU stopped; RAM refreshed; system running in low power mode) using the connected USB devices. Set to +5VSB to allow wake up from S3 sleep state (no power to CPU; RAM in slow refresh; power supply in reduced power mode). The default setting for the three jumpers is 1-2 to select +5V (because not all computers have the appropriate power supply).

NOTES:

1.This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the system does not power up.

2.The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in sleep mode.

1 22 3

 

USB01_PWR

+5V

+5VSB

A7V266

1

2

2

3

 

 

 

 

USB23_PWR

 

 

 

 

USB45_PWR

 

 

+5V

+5VSB

A7V266 USB Device Wake Up

Motherboard Settings

3. H/W SETUP

ASUS A7V266 User’s Manual

23