Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus A7V266 ASUS A7V266 User’s Manual, 18)Internal Microphone Connector (3-pinMIC2) (optional), 17)Internal Audio Connectors (4-1pin CD, AUX, MODEM) (optional)

1 110

Download 110 pages, 3.61 Mb

3.HARDWARE SETUP

17)Internal Audio Connectors (4-1 pin CD, AUX, MODEM) (optional)

These connectors allow you to receive stereo audio input from sound sources as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector. It also allows the sharing of mono_in (such as a phone) and a mono_out (such as a speaker) between the audio and a voice modem card.

1

MODEM

AUX (Black)

CD (White)

ModemIn-

ModemOut- Ground Ground

ChannelAudioRight

Ground

ChannelAudioLeft

ChannelAudioRight

Ground

ChannelAudioLeft

A7V266

A7V266 Internal Audio Connectors

18)Internal Microphone Connector (3-pin MIC2) (optional)

This connector allows you to connect chassis-mounted microphone to the motherboard instead of connecting an external microphone to the ATX connector.

NOTE: The internal microphone does not work if there is an external microphone connected to the external Mic (pink) jack. You may only use

one microphone at a time.

Connectors

3. H/W SETUP

A7V266

MIC2

13

Ground

MIC Input

MIC Power

A7V266 Internal Microphone Connector

ASUS A7V266 User’s Manual

39

Contents

JumperFree™ DDR DRAM 266MHz FSB AGP Pro/4X Product Name: ASUS A7V266 Manual Revision: 1.05 E766 Release Date: JUNE ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) 3.7.1 Installing an Expansion Card 3.7.2 Assigning IRQs for Expansion Cards 3.7.3 Accelerated Graphics Port (AGP) Pro Slot 3.7.4 Advanced Communication Riser (ACR) Slot 4.1.1 Upon First Use of the Computer System 6. SOFTWARE REFERENCE 7.1.3 Hardware Installation Procedure 7.1.4 Software Setup in Windows 98 Federal Communications Commission Statement •This device may not cause harmful interference, and •Re-orientor relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help 1.1How This Manual Is Organized 1.2 Item Checklist 2.1ASUS A7V266 Motherboard 2.1.1 Specifications PCI Expansion Slots: Advanced Communication Riser (ACR): Wake-On-LAN: Smart BIOS: Enhanced ACPI and 2.1.2Performance 2.1.3Intelligence 2.2Motherboard Components 2.2.1Component Locations 3.1Motherboard Layout 3.2Layout Contents SETUP H/W 3.3Hardware Setup Procedure 3.4Motherboard Settings Motherboard Frequency Settings (DIP Switches) 1) JumperFree™ Mode (JEN) 4.4 Advanced Menu Setting JEN 2)CPU External Frequency Selection (DIP_SW Switches 1–4) 3)Manual CPU Ratio Settings (DSW Switches 5-10) 1. To use this feature, JEN must be set to Jumper Mode, [1-2] in 3, HARDWARE SETUP.) 4)CPU Type Frequency Setting (PALO_FREQ) 5)I/O Voltage Settings (JP1, JP2) 6)Voltage Regulator Output Setting (VID1, VID2, VID3, VID4) 7)Bass Center Setting (CENTER/BASS, BASS/CENTER) 8)Keyboard Wake Up (KBWK) KBWK Enable Disable [2-3] 10)USB Device Wake-up(USB01_PWR/USB23_PWR/USB45_PWR) NOTES: 11)Clear RTC RAM (2-pinCLR_RTC) 12)Thermal Sensor CPU Setting (2-pinTHEMCPU) 3.5System Memory 3.5.1 DDR DIMM Support 3.5.1General DIMM Notes 3.5.2 Memory Installation 3.6Central Processing Unit (CPU) 3.7Expansion Cards 3.7.1 Installing an Expansion Card 3.7.2Assigning IRQs for Expansion Cards Standard Interrupt Assignments Interrupt Request Table for this Motherboard 3.7.3Accelerated Graphics Port (AGP) Pro Slot 3.7.4 Advanced Communication Riser (ACR) Slot 3.8Connectors 3.8.1 External Connectors 4)Parallel Port (Burgundy 25-pinPRINTER) Onboard Parallel Port 4.4.2 I/O Device Configuration) NOTE: Serial printers must be connected to the serial port NOTE 6)Game/MIDI Ports (Gold 15-pinGAME_AUDIO) (optional) 7)Audio Connectors (Three 1/8” AUDIO) (optional) Line Out Line In Mic 8)IDE Activity LED (2-pinIDELED) 9)Floppy Disk Drive Connector (34-1pin FLOPPY) 10)Primary (Blue) / Secondary IDE Connectors (40-1pin IDE1/IDE2) TIP: 6. SOFTWARE REFERENCE These are not jumpers, do not place jumper caps over these connectors 12)USB Headers (10-1pin USB2_3, USB4_5) 13)Infrared Module Connector (10-1pin IR_CON) 14)ASUS iPanel Connector (24-1pin AFPANEL) 15)Power Supply Connectors (20-pinblock ATXPWR) IMPORTANT: Make sure that the ATX 12V power supply (minimum 16)SMBus Connector (5-1pin SMB) enabling each one to act as a master by initiating data transfer 17)Internal Audio Connectors (4-1pin CD, AUX, MODEM) (optional) 18)Internal Microphone Connector (3-pinMIC2) (optional) one microphone at a time 20)Power Supply Thermal Sensor Connector (2-pinJTPWR) Digital Audio Interfaces (2-pin SPDIFOUT/CDSPDIFIN) 22)Chassis Open Alarm Lead (4-pinCHASSIS) chassis intrusion lead, place a jumper cap over the pins to close the circuit 23)ASUS iPanel Audio Connector (10-1pin AAPANEL) 24)ASUS SmartCard Connector (14-1pin SMARTCON) The following 20-pinPANEL illustration is for items 25)System Power LED Lead (3-1pin PWR.LED) 26)Keyboard Lock Switch Lead (2-pinKEYLOCK) 27)System Warning Speaker Lead (4-pinSPEAKER) 28)System Message LED Lead (2-pinMSG.LED) 29)System Management Interrupt Lead (2-pinSMI) 3.9Starting Up the First Time Award BIOS Beep Codes 4.1Managing and Updating Your BIOS 4.1.1 Upon First Use of the Computer System 1. Save Current BIOS to File Save Current BIOS To File A:\XXX-XX.XXX SETUP BIOS 4.1.2Updating BIOS Procedures Page 4.2BIOS Setup Program 4.2.1BIOS Menu Bar 4.2.2 Legend Bar General Help Saving Changes and Exiting the Setup Program Scroll Bar Sub-Menu 4.3Main Menu 4.3.1Primary & Secondary Master/Slave [User Type HDD] Translation Method [LBA] Cylinders Type Translation Method CHS Capacity Maximum LBA Capacity Multi-SectorTransfers [Maximum] SMART Monitoring [Disabled] PIO Mode [4] 4.3.2Keyboard Features Language [English] This field displays the BIOS language version A Note about Passwords Forgot the Password 3.Short the jumper 4.4Advanced Menu System/SDRAM Frequency Ratio [Auto] System/ PCI Frequency (MHz) Vcore [1.775V] CPU Level 1 Cache, CPU Level 2 Cache [Enabled] CPU Level 2 Cache ECC Check [Disabled] Notes for JumperFree Mode System Hangup Cause for Hangup: Improper CPU Speed Cause for Hangup: Improper CPU: System Frequency Multiple Cause for Hangup: Improper (For processors with unlocked frequency multiplier only) 4.4.1Chip Configuration SDRAM RAS to CAS Delay [3T] SDRAM Active to Precharge Time [6T] Bank Interleave [Auto] Configuration options: [None] [2 Banks] [4 Banks] [Auto] DRAM 4K/8K Page Enable [Auto] AGP Fast Write [Disabled] AGP Drive Strength [Auto] Graphics Aperture Size [32MB] Video Memory Cache Mode [UC] Onboard PCI IDE Enable [Both] 4.4.2I/O Device Configuration Onboard Peripheral Resource Control 4.4.3PCI Configuration PCI IRQ Resource Exclusion 4.5Power Menu Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] Suspend-to-RAMCapability [Disabled] Suspend Mode [Disabled] 4.5.1Power Up Control Wake Up by USB Device [Disabled] Wake Up by Keyboard [Space Bar] Power Up on PS2 KB/Mouse [Disabled] Automatic Power Up [Disabled] 4.5.2Hardware Monitor 4.6Boot Menu Boot Sequence Plug & Play O/S [No] Reset Configuration Data [No] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] Boot Up Floppy Seek [Enabled] 4.7Exit Menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Page 5.1Install Operating System 5.2 Start Windows 5.3A7V266 Series Motherboard Support CD 5.3.1 Installation Menu E-Color 3Deep: Show Motherboard Information: •Browse Support CD: Allows you to view the contents of the CD Browse Support CD: Page 6.1Winbond Smart Manager 6.1.1 Setting Up Smart Manager ManagerSmart REFERENCES/W6 Restart smart card reader 6.1.2Starting to Use Smart Manager 6.1.3Smart Manager Modes 6.2ASUS PC Probe 6.2.1 Starting ASUS PC Probe 6.2.2Using ASUS PC Probe Settings CPU Cooling System Setup History Information Hard Drives Memory Device Summary DMI Explorer Utility Execute Program 6.2.3ASUS PC Probe Task Bar Icon 6.3Multi-ChannelAudio Feature Setup 6.3.1 The C-MediaAudio Mixer 6.3.2 The C-MediaAudio Demo Program 6.3.3 Connector Configuration 6.4ASUS LiveUpdate 6.53Deep Color Tuner 6.5.1 3Deep Color Tuning 6.5.2The 3Deep Control Panel 6.6CyberLink PowerPlayer SE 6.6.1 Starting CyberLink PowerPlayer SE 6.6.2 CyberLink PowerPlayer Control Panel 6.7CyberLink PowerDVD 6.7.1 Starting CyberLink PowerDVD 6.7.2 CyberLink PowerDVD User Interface 6.8CyberLink VideoLive Mail 6.8.1Starting VideoLive Mail 6.8.2 CyberLink VideoLive Mail User Interface 7.1 Modem Riser 7.1.1 56K Software Modem 7.1.2 Primary/Seconday MR Layout of Primary 7.1.3Hardware Installation Procedure 7.1.4Software Setup in Windows 7.2 Glossary Boot Bus Master IDE Byte (Binary Term) COM Port Concurrent PCI LPT Port (Line Printer Port) MMX (Klamath) CPU as well as other OnNow PC100 ROM (Read Only Memory) SCSI (Small Computer System Interface) SDRAM (Synchronous DRAM) SPD for SDRAM module SSE (Streaming SIMD Extensions) INDEX Symbols