13) Bass Center Setting (2x3 pin CENTER/BASS, BASS/CENTER)

Use these jumpers in conjunction with the C-Media PCI Audio Driver and to adjust output for 4 or 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks, therefore it may be necessary to switch jumpers from the default position, type 1, to type 2, in order to reroute signals among the internal leads in the Line-In, Line-Out, Mic female sockets. Make sure a test is made using the Audio Driver software setup available on the Support CD.

A7V333

A7V333 Bass Center Setting

 

3

2

2

1

 

BCS1 BCS2

BCS1 BCS2

TYPE 1 BASS

TYPE 2 BASS

(Default)

 

14) Speaker Selector (3 pin SPEECH)

This jumper specifies which speaker to use for the ASUS POST Reporter function. The default setting to pins [2-3] feeds an external speaker to the Line-out jack (lime color). Set to pins [1-2] to use the internal buzzer (usually included in the chassis).

SPEECH

1

2

2

3

BUZZER

BACK PANEL

 

 

(Default)

A7V333

A7V333 Speaker Selector

ASUS A7V333 motherboard user guide

27