Asus A7V333 NOTE, only, Chapter 2: Hardware information, 24) Audio Input Line In Header (LINE_IN), 23) Line-outSelector Jumpers (4 pin BACK_LT / BACK_RT)

23) Line-out Selector Jumpers (4 pin BACK_LT / BACK_RT)

By default, these jumpers are shorted (jumpers on) to route the signal from the audio controller to the rear panel Line Out jack to make it available for audio out devices such as speakers or a headphone. If you connect the Intel Front Panel audio cable to the IPANEL connector (see next page), then remove the caps from these two jumpers to permit automatic switching of audio signals between the rear panel Line Out jack and the Intel audio cable.

BLOL FLOL BLOR FLOR

A7V333

BACK_LT BACK_RT

A7V333 Internal Line Out Connectors

24) Audio Input Line In Header (LINE_IN)

This connector suports audio input on left and right stereo audio channels. NOTE: The motherboard ships with Jumper caps over pins 1-2 and 4-5. Remove them only when making audio input connections.

A7V333

LINE_IN

BLINE_IN_R LINE_IN_R AGND BLINE_LIN_L ALINE_LIN_L

A7V333 LINE_IN Connector

42 Chapter 2: Hardware information