2.4Main menu

System Date

 

 

Wed, Dec 03 2003

Select Menu

System Time

 

 

15 : 30 : 30

 

Legacy Diskette A:

[1.44M, 3.5 in.]

Item Specific Help

Change the day, month,

 

 

 

 

 

 

IDE Primary Master

[ST321122A]

year and century.

IDE Primary Slave

[ASUS CDS520/A]

 

IDE Secondary Master

[None]

 

 

IDE Secondary Slave

[None]

 

 

Case Open Warning

[Enabled]

 

Supervisor Password

Clear

 

 

User Password

 

Clear

 

 

Security Option

[Setup]

 

 

Installed Memory

256MB

 

 

Halt On

 

 

[All Errors]

 

F1

: Help

↑↓

: Select Item

-/+

: Change Value

F5 : Setup Defaults

ESC

: Exit

→←

: Select Menu

Enter

: Select Sub-menu F10 : Save and Exit

System Date [day, mm dd yyyy]

Sets the system to the date that you specify (usually the current date). The format is month, day, year. Valid values for month, day, and year are Month: (1 to 12), Day: (1 to 31), Year: (1999 to 2099). Use the <Tab> key to move between the month, day, and year fields.

System Time [hh:mm:ss]

Sets the system to the time that you specify (usually the current time). The format is hour, minute, second. Valid values for hour, minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59). Use the <Tab> key to move between the hour, minute, and second fields.

Legacy Diskette A [1.44M, 3.5 in.]

Sets the type of floppy drive installed. Configuration options: [None]

[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]

Case Open Warning [Enabled]

Enable this option to activate the chassis intrusion feature of the motherboard. Configuration options: [Enabled] [Disabled]

Supervisor Password [Clear] / User Password [Clear]

These fields allow you to set passwords. To set a password, highlight the appropriate field and press <Enter>. Type in a password then press <Enter>. You can type up to eight alphanumeric characters. Symbols and other characters are ignored. To confirm the password, type the password again and press <Enter>. The password is now set to [Set]. This password allows full access to the BIOS Setup menus. To clear the password, highlight this field and press <Enter>. When the same dialog box appear, press <Enter>. The password is set to [Clear].

ASUS A7V400-MX motherboard user guide

2-9