2.7Boot menu

First Boot Device

[HDD-0

]

Select Menu

 

Second Boot Device

[CDROM]

Item Specific Help

Third Boot Device

[Floppy]

 

Fourth Boot Device

[Disabled]

Select your boot device

Plug & Play OS

[Yes]

priority.

Reset Configuration Data

[Disabled]

 

Quick Power On Self Test

[Enabled]

 

Boot Up Floppy Seek

[Disabled]

 

Boot Up NumLock Status

[On]

 

APIC Mode

[Enabled]

 

F1

:

Help

↑↓

:

Select

Item

-/+

:

Change

Value

F5 :

Setup Defaults

ESC

:

Exit

→←

:

Select

Menu

Enter

:

Select

Sub-menu

F10 :

Save and Exit

First/Second/Third/Fourth Boot Device

The Boot Menu allows you to select 13 types of boot devices. Promotion or demotion of devices alters the priority which the system uses to boot on system power up. Configuration options include [Floppy] [LS120] [HDD-0] [SCSI] [CDROM] [HDD-1] [HDD-2] [HDD-3] [ZIP100] [USB-FDD] [USB-ZIP] [USB-CDROM] [USB-HDD] [LAN] [Disabled]

Plug & Play OS [Yes]

This field allows you to use a Plug and Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may be reassigned by the OS. If you installed a non-PnP OS or if you want to prevent reassigning of interrupt settings, keep the default setting [No]. Configuration options: [No] [Yes]

Reset Configuration Data [Disabled]

Select [Enabled], if you want to clear the Extended System Configuration Data (ESCD).Configuration options: [Disabled] [Enabled]

Quick Power On Self Test [Enabled]

This field speeds up the Power-On-Self Test (POST) routine by skipping retesting several times. Configuration options: [Disabled] [Enabled]

Boot up Floppy Seek [Disabled]

When enabled, the BIOS will seek the floppy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]

Boot up NumLock Status [On]

Allows you to select the power-on state for the NumLock key.

Configuration options: [Off] [On]

2-26

Chapter 2: BIOS information