Primary/Secondary IDE Master/Slave

Primary IDE Master

Select Menu

Primary IDE Master

 

 

Item Specific Help

 

[Auto]

 

 

Access Mode

[Auto]

 

Press [Enter] to

 

 

 

 

 

Capacity

40020

MB

select.

Cylinder

19158

 

 

Head

16

 

 

Sector

255

 

 

PIO Mode

[Auto]

 

 

UDMA Mode

[Auto]

 

 

Transfer Mode

 

UDMA 5

 

 

F1 :

Help

↑ ↓

:

Select

Item

-/+

:

Change

Value

F5 : Setup Defaults

ESC :

Exit

→←

:

Select

Menu

Enter

:

Select

Submenu

F10: Save and Exit

Primary IDE Master/Slave [Auto]

Secondary IDE Master/Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, the setup BIOS automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard disk drive is too old or too new. If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. In these cases, select [Manual] to manually enter the IDE hard disk drive parameters. If no drive is installed or if you are removing a drive and not replacing it, select [None].

Configuration options: [None] [Auto] [Manual]

Access Mode [Auto]

The default [Auto] automatically detects an IDE hard disk drive. Select [CHS] in coordination with the [Manual] setting of the Primary IDE Master in to manually enter the hard disk drive values.

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

ASUS A7V400-MX SE

2 - 11