AGP Bridge Configuration

AGP Bridge Configuration

Select Menu

Graphics Aperture Size

 

Item Specific Help

 

[64M]

 

AGP Mode

[4X]

Select AGP aperture

AGP Driving Control

[Auto]

AGP Driving Value

 

DA

size.

AGP Fast Write

[Disabled]

 

Onboard Video Memory

[32M]

 

F1

:

Help

↑ ↓

:

Select

Item

-/+

:

Change

Value

F5 :

Setup Defaults

ESC

:

Exit

→←

:

Select

Menu

Enter

:

Select

Sub-menu

F10 :

Save and Exit

Graphics Aperture Size [64MB]

Sets the size of mapped memory for AGP graphic data. Configuration options: [256M] [128M] [64M] [32M] [16M] [8M] [4M] [1G] [512M]

AGP Mode

Sets the AGP transfer mode. AGP 4X transfers video data at 1066 MB/s and is backward compatible with AGP 1X and 2X AGP cards. When set to [1X], the AGP interface only provides a peak data throughput of 266 MB/s, even if you are using an AGP 4X card. Configuration options: [1X] [2X] [4X]

The AGP Mode automatically adjusts to 8X when you install an AGP 8X card.

AGP Driving Control [Auto]

Allows you to automatically select or manually assign the AGP Driving Value. Configuration options: [Auto] [Manual]

AGP Driving Value [DA]

This item is enabled when you set the AGP Driving Control to [Manual]. Press <Enter> to assign a hexadecimal AGP Driving Value. Configuration options: [Min = 0000, Max = 00FF]

AGP Fast Write [Disabled]

Enables or disables the AGP Fastwrite function. Configuration options: [Disable] [Enabled]

Onboard Video Memory [32M]

Allows you to set the share memory size for the onboard VGA. Configuration options: [16M] [32M] [64M]

2 - 18

Chapter 2: BIOS setup