3.Clear RTC RAM (CLRTC)

These jumpers allow you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS is powered by the onboard button cell battery.

To erase the RTC RAM:

1.

2.

3.

4.

5.

6.

Turn OFF the computer and unplug the power cord. Remove the battery.

Move the jumper cap to pin [1-2] to clear CMOS then replace the jumper cap back to pin [2-3] after 3 seconds.

Re-install the battery.

Plug the power cord and turn ON the computer.

Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.

CLRTC

A7V600-X

3

2

2

1

 

Clear CMOS

Normal

 

(Default)

A7V600-X Clear RTC RAM

4.VCORE over-voltage (3-pin OVER_VOLT1)

When enabled, this jumper allows CPU VCORE ranges of 1.7V to 2.05V.

When this jumper is disabled, VCORE setting has a range of +1.5V to +1.85V. You may adjust the CPU VCORE through the BIOS Setup.

Setting to a very high core voltage may cause permanent damage to the CPU. It is recommended that you keep the default setting (Disable).

OVER_VOLT1

1

2

2

3

 

 

 

 

 

Enable Disable (Default)

A7V600-X

A7V600-X OVER_VOLT Setting

ASUS A7V600-X Motherboard

1-17