4.Select Start Create Process and press <Enter> to setup hard disk for RAID system. The following confirmation message appears:

The same confirmation message appears when the Auto Setup for Capacity option is selected.

The data on the selected disks will be destroyed. Continue? Press Y/N

Press “Y” to confirm or “N” to return to the configuration options.

3.4.4 Delete Array

1.In the VIA RAID BIOS utility main menu, select Delete Array then press the <Enter> key. The focus is directed to the list of channel used for IDE RAID arrays.

2.Press the <Enter> key to select a RAID array to delete. The following confirmation message appears.

The selected array will be destroyed.

Are you sure? Continue? Press Y/N

Press “Y” to confirm or “N” to return to the configuration options.

3.4.5 Select Boot Array

1.In the VIA RAID BIOS utility main menu, select Select Boot Array then press the <Enter> key. The focus is directed to the list of channel used for IDE RAID arrays.

2.Press the <Enter> key to select a RAID array for boot. The Status of the selected array will change to Boot. Press <ESC> key to go return to menu items. Follow the same procedure to deselect the the boot array.

 

 

 

 

 

 

ESC : Exit

 

 

 

Channel

Drive

Name

Array Name

Mode

Size(GB)

Status

 

 

 

 

 

 

 

 

 

 

[ ]

Channel0

Master



XXXXXXXXXX

 

xxxxxxx

xxx.xx

Hdd

[ ]Channel0

Slave

XXXXXXXXXX

 

xxxxxxx

xxx.xx

Hdd

 

Channel1

Master

No Drive

 

 

 

 

 

Channel1

Slave 

No Drive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ASUS A7V600-X Motherboard

3-13