Asus A7V880 <Enter, <Enter, Limited, No Access, View Only, Installed, Installed, Full Access, Not Installed, Clear User Password, Change User Password

After you have set a supervisor password, the other items appear to allow you to change other security settings.

Security Settings		<Enter>	to change
		password.
Supervisor Password	: Installed	<Enter>	again to
User Password	: Not Installed	disabled password.

Change Supervisor		Password
User Access	Level		[Full Access]
Change User	Password
Clear User Password
Password Check			[Setup]
Boot Sector	Virus	Protection	[Disabled]

User Access Level [Full Access]

Allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access]

No Access prevents user access to the Setup utility.

View Only allows access but does not allow change to any field.

Limited allows change only to selected fields, such as Date and Time.

Full Access allows viewing and changing all the fields in the Setup utility.

Change User Password

Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you have set a password, this item shows Installed.

To set a User Password:

1.Select the Change User Password item and press <Enter>.

2.On the password box that appears, type a password combination of at least six

(6) letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you have successfully set your password.

The User Password item now shows Installed.

To change the user password, follow the same steps as in setting a user password.

Clear User Password

Select this item if you wish to clear the user password.

2-30 Chapter 2: BIOS Setup