Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus A7V880 3.2.2 Drivers menu, 3.2.3 Utilities menu, USB 2.0 Driver, VIA 4 in 1 drivers, SoundMAX Audio Driver, Marvell Gigabit LAN Driver, VIA RAID Controller driver

1 76

Download 76 pages, 2.23 Mb

3.2.2 Drivers menu

The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices.

VIA 4 in 1 drivers

This item installs the following drivers:

-VIA Registry (INF) driver

-VIA AGP VxD driver

-VIA ATAPI vendor support driver

-VIA PCI IRQ Miniport driver.

Marvell Gigabit LAN Driver

Installs the Marvell® 88E8001 Gigabit LAN drivers for Gigabit LAN solution that provides up to 1000Mbps data transfer rates.

VIA RAID Controller driver

Installs the VIA 8237 RAID controller driver and application.

SoundMAX Audio Driver

Installs the ADI 1888 SoundMAX® AC’97 compliant audio controller and application.

USB 2.0 Driver

Installs the USB 2.0 driver to upgrade your USB 1.1 ports to USB 2.0.

3.2.3 Utilities menu

The Utilities menu shows the applications and other software that the motherboard supports.

ASUS A7V880 motherboard

3-3

Contents

Page E1654 Revised Edition May Chapter 1: Product introduction IRQ assignments for this motherboard Chapter 2: BIOS Information 2.1 Managing and updating your BIOS 2.1.1 Creating a bootable floppy disk 2.1.2 Using AFUDOS to update the BIOS 2.1.3 Using AFUDOS to copy BIOS from PC Chapter 3: Software support 3.2.1 Running the support CD Where to find more information Electrical safety Operation safety Conventions used in this guide Typography Page Page Page Thank you for buying the ASUS® A7V880 motherboard Check your motherboard package for the following items ASUS motherboard ASUS support CD 1 x Serial ATA 2-in-1cable’ 1.3.1 Product Highlights 1.3.2 Unique ASUS features ASUS EZ Flash BIOS ASUS Instant Music Lite Onboard LED 1.5.1 Motherboard layout 1.5.2 Placement direction 1.5.3 Screw holes 1.6.1 Overview 1.6.2 Installing the CPU 2.Unlock the socket by pressing the lever sideways, then lift it up to a 90° 100° angle 4.Carefully insert the CPU into the socket until it fits in place 1.7.1 DIMM sockets location 1.7.2Memory configurations DDR Qualified Vendor List Table DDR400 Qualified Vendors List Table 1 DDR400 Qualified Vendors List 1.7.3 Installing a DIMM 1.8.1 Interrupt assignments 1.8.2 IRQ assignments for this motherboard 1.8.3 PCI slots 1.8.4 AGP slot 1.8.5 Wi-Fislot 1.Clear RTC RAM (CLRTC) To erase the RTC RAM: 1.Turn OFF the computer and unplug the power cord 3.Plug the power cord and turn ON the computer Hold down the 2.Keyboard power (3-pinKBPWR) 3.USB device wake-up (3-pinUSBPWR12, USBPWR34, USBPWR56, USBPWR78) 4.VCORE over-voltage (3-pinOVER_VOLT1) When enabled, this jumper allows CPU VCORE ranges of 1.75V 1.10.1 Rear panel connectors 1.10.2 Internal connectors 3.ATX power connectors (20-pinATXPWR) 4.Internal audio connectors (4-pinCD, AUX) 5.CPU and chassis fan connectors (3-pinCPU_FAN, CHA_FAN) 6.USB header (10-1pin USB56, USB78) 7.Front panel audio connector (10-1pin FP_AUDIO) Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins 8.Chassis intrusion connector (4-1pin CHASSIS) 9.GAME/MIDI connector (16-1pin GAME) 10.Serial ATA connectors (7-pinSATA1, SATA2) 11.Digital Audio connector (6-1pin SPDIF_OUT) 12.System panel connector (10-1pin PANEL) •System Power LED Lead (Green 3-1pin PLED) •System Warning Speaker Lead (Orange 4-pinSPEAKER) •Reset Switch Lead (Blue 2-pinRESET) •ATX Power Switch / Soft-OffSwitch Lead (Yellow 2-pinPWR ) •System Management Interrupt Lead (2-pinSMI) •Hard disk activity LED (Red 2-pinIDELED) Page Page 2.1.1Creating a bootable floppy disk 2.1.2 Using AFUDOS to update the BIOS 2.1.3 Using AFUDOS to copy BIOS from PC 2.1.4 Using ASUS EZ Flash to update the BIOS 2.1.5 Recovering the BIOS with CrashFree BIOS 4. When the BIOS update process is complete, reboot the system To recover the BIOS from the support CD: Place the support CD in the Otherwise, POST continues with its test routines <Ctrl+Alt+Delete 2.2.1 BIOS menu screen 2.2.2 Menu bar 2.2.3 Navigation keys 2.2.4 Menu items 2.2.5 Sub-menuitems 2.2.6 Configuration fields 2.2.7 Pop-upwindow 2.2.8 Scroll bar 2.3.1 System Time [xx:xx:xxxx] 2.3.2 System Date [Day xx/xx/xxxx] 2.3.3 Legacy Diskette A [1.44M, 3.5 in.] 2.3.4 Primary and Secondary IDE Master/Slave Type [Auto] LBA/Large Mode [Auto] Block (Multi-sectorTransfer) [Auto] PIO Mode [Auto] 2.3.5 System Information 2.4.1 Instant Music Configuration 2.4.2 Chipset SDRAM CAS# Latency [2.5] SDRAM Bank Interleave [Disabled] Precharge to Active(Trp) [4T] Active to Precharge(Tras) [9T] Active to CMD(Trcd) [4T] REF to ACT/REF to REF (Trcfc) [15T] AGP Mode [AGP 8X] AGP Read Synchronization [Disabled] AGP Fast Write [Disabled] Graphics Aperture Size [128MB] AGP Master 1 W/S Read [Disabled] 2.4.3 Onboard Devices Configuration EPP Version [1.9] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7] 2.4.4 PCI PnP Plug and Play O/S [No] Configuration options: [No] [Yes] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] 2.4.5 JumperFree Configuration 2.4.6 USB Configuration 2.5.1 Suspend Mode [Auto] 2.5.2 Repost Video on S3 Resume [No] 2.5.3 ACPI 2.0 Support [No] 2.5.4 ACPI APIC Support [Enabled] 2.5.5 APM Configuration Restore on AC Power Loss [Power Off] Configuration options: [Power Off] [Power On] [Last State] Wake Up/ Power On By Ring [Disabled] Power On By PCI Devices [Disabled] Power On By RTC Alarm [Disabled] Hardware Monitor 2.6.1 Boot Device Priority Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM 2.6.3 Security User Access Level [Full Access] No Access View Only Limited Full Access Password Check [Setup] Boot Sector Virus Protection [Disabled] Exit & Save Changes Yes Exit & Discard Changes Discard Changes Load Setup Defaults Page 3.2.1 Running the support CD 3.2.2 Drivers menu 3.2.3 Utilities menu 3.2.4 ASUS Contact Information Instant Music Lite To enable ASUS Instant Music Lite: Connect the analog audio cable from the optical drive Turn on the system and enter the BIOS by pressing the In the To use ASUS Instant Music Lite: Instant Music function keys (Set 1) Instant Music function keys (Set 2) 4.Press Esc to turn ON Instant Music Lite 5.Place an audio CD into the drive