UMA Frame Buffer Size [Auto]

This item appears only when you set the previous item to [Force]. Configuration options: [Auto] [32M] [64M] [128M] [256M] [512M] [1G] [2G]

2.5.5Onboard Devices Configuration

HD Audio Device [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

 

The following two items appear only when you set the HD Audio Device item to [Enabled].

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high- definition audio depending on the audio standard that the front panel audio module supports.

[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97.

SPDIF Out Type [SPDIF]

[SPDIF]

Sets to [SPDIF] for SPDIF audio output.

[HDMI]

Sets to [HDMI] for HDMI audio output.

Realtek LAN Controller [Enabled]

[Enabled]

Enables the Realtek LAN controller.

[Disabled]

Disables the controller.

Realtek PXE OPROM [Disabled]

This item appears only when you set the Realtek LAN Controller item to [Enabled] and allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options: [Enabled] [Disabled]

2.5.6APM

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system state was

 

before the AC power loss.

WOL (include AC Power Loss) [Disabled]

[Disabled]

Disables Wake On LAN after a power failure (G3 state).

[Enabled]

Enables Wake On LAN after a power failure (G3 state).

2-20

Chapter 2: BIOS information