2.3.5Primary and Secondary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.

Phoenix-Award BIOS CMOS Setup Utility

Main

 

 

Primary IDE Master

Select Menu

 

 

 

 

 

 

 

Primary IDE Master

[

 

]

Item Specific Help

 

Auto

 

Access Mode

 

 

[Auto]

 

Press [Enter] to

 

 

 

 

 

 

 

Capacity

 

 

82 GB

select

 

Cylinder

 

39420

 

 

 

Head

 

16

 

 

 

Sector

 

255

 

 

 

PIO Mode

 

[Auto]

 

 

UDMA Mode

 

[Auto]

 

 

Transfer Mode

 

UDMA 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1:Help

↑↓ : Select Item

 

-/+: Change Value

F5: Setup Defaults

 

ESC: Exit

→←: Select Menu

Enter: Select Sub-menu

F10: Save and Exit

The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not user-configurable. These items show N/A if no IDE device is installed in the system.

PIO Mode

Sets the PIO mode for the IDE device.

Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]

UDMA Mode

Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]

IDE Primary Master/Slave [Auto]; IDE Secondary Master/ Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, the BIOS automatically fills in the correct values for the remaining fields on this sub-menu. If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. Select [Manual] to manually enter the IDE hard disk drive parameters. If no drive is installed select [None].

Configuration options: [None] [Auto] [Manual]

2 - 12

Chapter 2: BIOS setup