7.Chassis intrusion connector (4-1 pin CHASSIS)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

+5VSB MB

Chassis Signal GND

A8S-X

CHASSIS

(Default)

A8S-X Chassis intrusion connector

8.GAME/MIDI connector (16-1 pin GAME1)

This connector supports a GAME/MIDI module. If a GAME/MIDI module is available, connect the GAME/MIDI cable to this connector. The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files.

A8S-X

A8S-X GAME connector

+5VJ2B1J2CXMIDIJ2CYJ2B2MIDI OUT_IN_

GAME +5V J1B1 J1CX GND GND J1CY J1B2 +5V

The USB/GAME module is purchased separately.

1-20

Chapter 1: Product introduction