The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None.

Legacy USB Support [Auto]

Allows you to enable or disable the legacy USB support. When set to Auto, the system disables the legacy USB support if there are no USB devices connected. Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed]

Stop EHCI Hand-Off [Enabled]

Allows you to stop the EHCI HC in OHCI handover. Enable this item when installing operating systems that does not support EHCI host controllers. Configuration options: [Disabled] [Enabled]

2.4.3 CPU Configuration

The CPU configuration menu displays the current CPU configuration.

CPU Configuration

 

Module Version:

14.04

 

Physical Count:

1

 

Logical

Count :

1

 

AMD Athlon(tm) 64 Processor 3000+

Revision: E3

 

 

Cache L1: 64KB

 

 

Cache L2: 512KB

 

 

Speed

: 1810MHz

 

Current

FSB Multiplier: 9x

Maximum

FSB Multiplier: 9x

Able to

Change Freq.

: Yes

uCode Patch Level

: None Required

The items in this menu varies depending on the type of processor installed.

2-16

Chapter 2: BIOS Setup