Asus A8V-XE Timing Mode [Auto], CAS# latency (Tcl), 1T/2T Memory Timing, Current DRAM Frequency, Row precharge Time (Trp), RAS# to CAS# delay (Trcd)

Phoenix-Award BIOS CMOS Setup Utility

Advanced

		DRAM Configuration				Select Menu
	Current DRAM Frequency				166 MHz	Item Specific Help
	Timing Mode			[	Auto]
x	Memclock index value (Mhz)				200Mhz	<Enter> to select DARM
x	CAS# latency (Tcl)			3		configuration by
x	Min RAS# active time(Tras)				8T	[Auto] is recommended.
x	RAS# to CAS# delay		(Trcd)		4T	[Manual] allows you to
x	Row precharge Time		(Trp)		4T	set each
x	1T/2T Memory Timing				2T	configuration on your
	S/W DRAM Over 4G Remapping			[Enabled]		own.
	H/W DRAM Over 4G Remapping			[Enabled]
	MTRR mapping mode			[Continous]
F1:Help		↑↓ : Select Item		-/+: Change Value		F5: Setup Defaults
ESC: Exit		→←: Select Menu		Enter: Select Sub-menu		F10: Save and Exit

Current DRAM Frequency

Shows the Transfer mode. This item is not configurable.

Timing Mode [Auto]Sets the timing mode. Configuration options: [Auto] [Manual]Memclock index value (Mhz)Shows the memory clock index value. This item is not configurable.CAS# latency (Tcl)

Shows the latency between the SDRAM read command and the time the data actually becomes available.This item is not configurable.

Min RAS# active time (Tras)Shows the minimum RAS# active time. This item is not configurable.RAS# to CAS# delay (Trcd)

Shows the latency between the DDR SDRAM active command and the read/write command. This item is not configurable.

Row precharge Time (Trp)Shows the Row precharge time.This item is not configurable.1T/2T Memory TimingShows the memory timing. This item is not configurable.S/W DRAM Over 4G Remapping [Enabled]

Enables or disables the S/W DRAM over 4G remapping mode Configuration options: [Disabled] [Enabled]

H/W DRAM Over 4G Remapping [Enabled]

Enables or disables the H/W DRAM over 4G remapping mode Configuration options: [Disabled] [Enabled]

2-22 Chapter 2: BIOS setup