3. Installing the ADSL Modem
3.2Rear Panel (Cont’)
7.HUB-PC SwitchThe HUB-PC switch controls the crossover function. Modem-to-PC connection must contain crossovers. When connecting the modem to a PC, leaving the switch on the default position PC allows you to implement crossover cabling without using a crossover cable. When connecting the modem to an Ethernet hub’s RJ-45 downlink port, use a pen or screwdriver to slide the switch to HUB and implement straight-through cabling. If you run out of the hub’s downlink ports and connect the modem to the uplink port, you must slide the switch to the position of PC.
| Example 1. Modem to PC | Example 2. Modem to Hub (Downlink) | Example 3. Modem to Hub (Uplink) |
| UPLINK | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | UPLINK | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| | | | | | | | | |
When using a PC with the modem, adjust the HUB-PC switch to the position of PC.
When connecting the modem to an | When connecting the modem to an |
Ethernet hub’s downlink port, adjust the | Ethernet hub’s uplink port, adjust the HUB- |
HUB-PC switch to the position of HUB. | PC switch to the position of PC. |