
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives.
SATA6G_1 | SATA6G_2 |
GND RSATATXP1 RSATATXN1 GND RSATARXN1 RSATARXP1 GND | GND RSATATXP2 RSATATXN2 GND RSATARXN2 RSATARXP2 GND |
AHCI mode is not supported under Windows® 8 / Windows® 8.1 operating systems. Ensure to set the type of the SATA connectors to [IDE] from Advanced > SATA Configuration > OnChip SATA Type in the BIOS.
6.USB 2.0 connectorsThese connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.NC
GND
USB_P5+
USB_P5-
USB+5V
USB56
PIN 1
GND
USB_P6+
USB_P6-
USB+5V
AM1I-A
NC
GND
USB_P7+
USB_P7-
USB+5V
USB78
PIN 1
GND
USB_P8+
USB_P8-
USB+5V
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB 2.0 module is purchased separately.
ASUS |