USB 1~8 [Enabled]

Allows you to enable or disable an individual USB port. Refer to the section 1.2.3 Motherboard layout in this user manual for the locations of the USB ports. Configuration options: [Enabled] [Disabled].

2.6.4NB Configuration

iGFX Multi-Monitor [Disabled]

Set this item to [Enabled] to empower both integrated and discrete graphics for multiple- monitor output. This item must be enabled before using AMD® Dual Graphics Technologies.

Configuration options: [Disabled] [Enabled]
Primary Vedio Device [PCIE Video]

Allows you to select which of the iGFX/PCIE Graphics device should be the Primary Vedio Device. Configuration options: [iGFX Video] [PCIE Vedio]

Integrated Graphics [Auto]

Enables the integrated graphics controller. Configuration options: [Auto] [Force]

UMA Frame Buffer Size [Auto]

This item appears only when you set Integrated Graphics to [Force] and allows you to configure the UMA Frame Buffer Size. Configuration options: [Auto] [64M] [128M] [256M] [512M] [768M] [1G] [2G].

2.6.5Onboard Devices Configuration

HD Audio Azalia Device [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

 

The following item appears only when you set the HD Audio Azalia Device item to

 

[Enabled].

Azalia Front Panel [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high- definition audio depending on the audio standard that the front panel audio module supports.

[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97]Sets the front panel audio connector (AAFP) mode to legacy AC’97
Realtek LAN Controller [Enabled]

[Enabled]

Enables the Realtek LAN controller.

[Disabled]

Disables the controller.

Realtek PXE OPROM [Disabled]

This item appears only when you set the Realtek LAN Controller item to [Enabled] and allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options: [Enabled] [Disabled]

2-18

Chapter 2: BIOS information