OnChip SATA MAX Speed [SATA 6.0Gb/s]

Sets the maximum onboard SATA port speed. Configuration options: [SATA 6.0Gb/s] [SATA 3.0Gb/s]

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Enabled] [Disabled]

2.6.3USB Configuration

The items in this menu allow you to change the USB-related features.

The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None.

Enabled All of USB Devices [Enabled]

Allows you to enable or disable all USB ports. Configuration options: [Disabled] [Enabled]

Legacy USB Support [Enabled]
[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Disabled]The USB devices can be used only for the BIOS setup program.

[Auto]

Allows the system to detect the presence of USB devices at startup. If

 

detected, the USB controller legacy mode is enabled. If no USB device is

 

detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]

[Enabled]

Enables the support for USB3.0 devices on legacy operating systems (OS).

[Disabled]

The USB3.0 devices can be used only for the BIOS setup program.

[Auto]

Allows the system to detect the presence of USB3.0 devices at startup.

 

If detected, the USB3.0 controller legacy mode is enabled. If no USB3.0

 

device is detected, the legacy USB3.0 support is disabled.
EHCI Hand-off [Disabled]

[Enabled]

Enables the support for operating systems without an EHCI hand‑off

 

feature.

[Disabled]

Disables the function.
USB Single Port Control
Allows you to enable/disable individual USB ports.USB3_1,2 [Enabled]Allows you to enable or disable an individual USB3.0 port. Refer to the section1.2.3Motherboard layout in this user manual for the locations of the USB ports.Configuration options: [Enabled] [Disabled].

ASUS AM1I-A

2-17