Features

The AP1400R is configured for the ASUS CUR-DLSR smart motherboard that uses the ServerSetTM chipset from ServerWorks® . The motherboard supports dual Pentium III processors to accelerate even the most complicated server tasks. The following are highlights to the server’s many features. For additional information, refer to the CUR-DLSR User’s Manual.

Chassis: ASUS AR-10

•Chassis: 1U form factor that fits in a standard 19” rack

•SCSI Backplane: Supports three SCSI hard drives using 80- pin SCA-2 connectors

•Power: Pinot 200W single power supply equipped with universal AC input and ATX-compliant output cables

•Device Bays: Support for one 3.5-inch slim type floppy device, one 5.25-inch slim type CD-ROM drive, and three 3.5-inch wide 1-inch high hot-swappable SCA SCSI hard disk drives in removable trays

Motherboard: ASUS CUR-DLSR

•Processor: Dual Intel® Pentium III FC-PGA processors running up to 1GHz

•Memory: Four 168-pin DIMM sockets that support up to 4GB PC133 registered SDRAM with ECC support

•Onboard SCSI: LSI® 53C1010-33 dual-channel Ultra160 SCSI controller that supports up to 30 SCSI devices using two 68-pin Wide SCSI connectors

•Onboard LAN: Dual Intel® 82559 Fast-Ethernet server controllers that supports 10BASE-T and 100BASE-TX, RJ-45 output

•Onboard VGA: ATI® Rage XL VGA controller with 4MB PC100

SDRAM

•Integrated Super I/O: PC97317 controller that supports one floppy drive, two serial ports, one printer port, two USB ports, one PS/2 keyboard, and one PS/2 mouse

•Expansion Slot: One full-length 64-bit/33MHz PCI slot on riser card

14

Chapter 1: System Overview