SCSI Hard Disk Drives

The system comes with three externally accessible hard disk drive bays.

Hot-Swap Drive Tray

In each of the HDD bays is a hot-swap tray for mounting a hard disk drive. Flip open the tray levers to release the tray, then slide the tray out of the chassis.

Tray Levers

IMPORTANT

Take note of the drive tray orientation before you slide it out. The tray will not fit back into the bay if you insert it the wrong way.

SCSI HDD Mounting

Place the SCSI hard disk drive to the hot-swap drive tray and secure it with four screws as shown. Ensure the correct drive tray

orientation before installing the HDD.

40

Chapter 3: Hardware Setup