2.8Installing the front bezel and rack ears

1.Secure a metal handle to one end of the front bezel using two small screws that came with the accessory box. Do the same to secure a metal handle to the other end of the bezel.

2.Fit the front bezel to the chassis together with the mounting ear by matching the screw holes. Secure the mounting ear using two screws. Do the same to secure the other mounting ear.

Mounting ear

3.Press the black peg to fasten the front bezel to the mounting ear. Do the same to the other peg.

To remove the front bezel, pull the black pegs on each end to release, then use your two hands to pull out the front bezel as shown.

30

Chapter 2: Hardware Setup