2.13.2 SCSI Backplane frontside and backside

The SCSI backplane assembly of this server is comprised of one SCSI board (BP6LS-AS35) with 68-pin SCSI connector, two 12V power inputs, two fan connectors (FAN1, FAN2) and three jumper connectors (J1, J2,

J3). This configuration allows SCA SCSI hard disk drives to be docked into the server.

A. SCSI Backplane Frontside

 

 

 

 

 

blower

 

 

 

 

 

connector

 

 

 

 

 

SCSI 68-pin

 

 

 

 

 

Power connectors

 

 

 

 

connector

 

 

 

 

 

SMBus to power

 

 

 

 

 

 

 

SMBus to

 

 

 

 

 

 

 

motherboard

supply connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDD Access

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LED connect

 

 

 

 

 

 

 

 

 

 

 

 

 

to motherboard

B. SCSI Backplane Backside

SCSI ID = 0

 

(Disk Drive 1)

 

SCSI ID = 1

 

(Disk Drive 2)

 

SCSI ID = 2

 

(Disk Drive 3)

 

SCSI ID = 3

 

(Disk Drive 4)

 

SCSI ID = 4

 

(Disk Drive 5)

 

SCSI ID = 5

HD activity LED

(Disk Drive 6)

HD status LED

Refer to “1.5 LED Table” on page 1-6, for detailed SCSI Backplane LED display descriptions.

User’s Manual

2-27