2.6Hard disk drives

The AP1710-S5 comes with six externally accessible drive bays. In each drive bay is a removable tray for mounting an SCA SCSI hard disk drive.

2.6.1 Installing a hard disk drive

Follow these steps to install a SCSI hard disk drive.

1.Open the front panel door.

2.Release the drive bay by lifting

the spring lock upwards, then pull the tray lever outwards.

Spring lock

3.The tray will slightly eject after the tray lever is pulled down. Pull

the hard disk drive tray out from the chassis.

Tray lever

4. Place an SCA SCSI hard drive into the drive tray. Secure the drive with four (4) round head screws.

2-16

Chapter 2: Hardware setup