2.9.4 Power supply modules

The AP1710-S5 has two power supply modules. These hot swap power modules can be removed or installed while the server is powered ON. One power module is enough to power the server. When two power supply modules are installed, the task of providing power to the server is shared.

To remove the redundant power supply module:

1.Remove the power module screw.

2.Press down the rubber lever

3.Pull the power module handle from the chassis.

Redundant Power Housing Screw

2 1

3

Lever

500W Redundant

Power Module

Refer to the Appendix for the redundant power module specification.

ASUS AP1710-S5 user guide

2-29