SCSI Hard Disk Drives

The system comes with three externally accessible SCA hard drive bays on each side to make a total of six.

Hot-Swap Drive Tray

In each of the HDD bays is a hot-swap tray for mounting a hard disk drive. Flip open the tray levers to release the tray, then slide the tray out of the chassis.

Tray Levers

SCSI HDD Mounting

Place the SCSI hard disk drive to the hot-swap tray and secure it with four screws as shown.

HDD Installation

After the drive is secured to the tray, carefully insert the drive into the bay, then push

the levers back in place.

IMPORTANT

Make sure that the SCSI cable is connected to the motherboard and the backplane. Refer to the section “Connecting Cables”.

AP2400R Hardware Reference Guide

35