CD-ROM Drive

CD-ROM Installation

Place the CD-ROM drive in its bay and slide it inward.

Secure the drive to the chassis with the four levers as indicated by the arrows. Connect the IDE and power cables to the CD-ROM.

Floppy Drive

The system comes with the floppy drive already installed. Refer to this section when you need to replace the floppy drive.

Floppy Drive Mounting

Mount the two brackets to the floppy drive and secure it with four screws and connect the white ribbon cable (compact version of the standard gray floppy drive cable). The white ribbon cable already includes power so there is no place for a separate floppy power connector.

AP2400R Hardware Reference Guide

37