I. Introduction

Features

The following are highlights to this server’s many features. For additional features and details, read the motherboard User’s Manual included with this server package.

•Processor: Dual Intel Pentium II processors provide up to 450MHz on each processor for extreme server processing speeds.

•I2O: Includes Intel’s i960RD I/O processor with 32KB NVRAM, 4x512KB Flash EEPROM, and 2 SIMM slots for up to 256MB of memory.

•Memory: Four DIMM slots with up to 1GB SDRAM with ECC.•Onboard IDE: Up to 33MB/sec IDE transfer with UltraDMA/33.•Chipset: Intel 440BX supports up to 100MHz front side bus.•Onboard LAN: Onboard Intel 10/100Base-TX Fast Ethernet.

•Onboard SCSI: Onboard Adaptec 7890 SCSI with three onboard con- nectors to independently connect 68-pin Ultra2 SCSI devices, 68-pin Wide-SCSI devices, and 50-pin Narrow-SCSI devices.

•SCSI Backplane: Ultra2 SCSI SCA backplane with remote SCSI ID dip switches and power to support up to 5 Ultra2 SCSI SCA hard drives.

•Device Bays: Support one floppy, one CD-ROM, two additional fixed devices, and five hot-swap SCA hard disk drives.

•Onboard Hardware Monitor: Provides information for system and processor voltages, fan status, temperature, chassis intrusion, and pro- vides automatic system restart.

•ASMA and Intel LDSM: Provides server monitoring, management, and control.•Onboard VGA: Onboard S3 TrioV2/DX VGA with 1 MB upgradeable to 2 MB.

I. Introduction

AP2500 Hardware Reference Guide

9