2.3.4Storage Configuration
The items in this menu allow you to set or change the configurations for the SATA devices installed in the system. Select an item then press <Enter> if you want to configure the item.
OnChip S-ATA Controller [Enabled]
Enables or disables the OnChip SATA controller. Configuration options: [Disabled] [Enabled]
SATA Mode Select [SATA Mode]
This item appears only when you set the OnChip SATA Controller item to [Enabled]. Allows you to set the OnChip SATA mode. Configuration options: [SATA Mode] [RAID Mode] [AHCI Mode]
Hard Disk Write Protect [Disabled]
Disables or enables device write protection. This will be effective only if device is accessed throuh BIOS. Configuration option: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [5]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
2.3.5System Information
This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu.
BIOS Information
Displays the
Processor
Displays the
System Memory
Displays the
2.4Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system devices.
Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
CPU Configuration
JumperFree Configuration
Chipset
Configure CPU.
Onboard Devices Configuration USB Configuration
PCIPnP
Chapter 2: BIOS information |