Change User Password

Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:

1.Select the Change User Password item and press <Enter>.

2.In the password box, key in a password containing up to six letters or numbers, or both, then press <Enter>.

3.Confirm the password when prompted.

The message Password Installed appears after you set your password successfully. To change the user password, follow the same steps in setting a user password.

Clear User Password

Select this item to clear the user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always]

2.7Tools menu

The Tools menu items allow you to configure options for special functions. Select an item then press <Enter> to display the sub-menu.

 

 

BIOS

SETUP

UTILITY

Main Advanced

Power

Boot

Tools

Exit

ASUS EZ Flash 2

 

 

 

 

Express Gate

 

[Auto]

 

 

Enter OS Timer

 

[10 Seconds]

 

Reset User Data

[No]

 

 

AI NET2

Press ENTER to run the utility to select and update BIOS.

This utility supports 1.FAT 12/16/32(r/w) 2.NTFS(read only) 3.CD-DISC(read only)

2.7.1ASUS EZ Flash 2

Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice. See section 2.1.2 ASUS EZ Flash 2 for details.

2-14

Chapter 2: BIOS information