3 Chapter
SB HD Azalia Configuration
Options for SB HD Azalia.
HD Audio Azalia Device [Enabled]
Allows you to enable or disable the HD Audio controller.
Configuration options: [Disabled] [Enabled]
Azalia Front Panel [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or | |
module supports. | |
[AC 97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97 |
[HD] | Sets the front panel audio connector (AAFP) mode to high definition |
| audio. |
SPDIF Out Type [SPDIF] | |
[SPDIF] | Sets to [SPDIF] for SPDIF audio output. |
[HDMI] | Sets to [HDMI] for HDMI audio output. |
3.5.8APM
ErP Ready [Disabled]
[Disabled] | Disables the Energy Related Products (ErP) Ready function. |
[Enabled] | Allows BIOS to switch off some power at S5 state to get system ready for |
| the ErP requirement. When set to [Enabled], power for WOL, WO_USB, |
| audio and onboard LEDs will be switched off at S5 state. |
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Chapter 3: BIOS setup |