8.Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
• ��We ���������recommend ����that ���you connect������� �a high���������������-definition front����� panel����� audio����� module������ to�� this����
connector to avail of the motherboard’s high-definition audio capability.
•If�� you��� ����want ��to connect������� �a high���������������-definition or�� an�� �����AC’97 �����front �����panel �����audio module������ to�� this����
connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
9.Direct Connector (2-pin DRCT)
This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard.
1 Chapter
Ensure that your chassis comes with the button cable that supports the DirectKey feature.
Refer to the technical documentation that came with the chassis for details.
1-42 | Chapter 1: Product introduction |