Front Panel

￿Speed

Recordable￿

Rewritable￿￿ High

®

40x12x48x￿

1

2

3

4

5

6

1.Headphone jackThis jack allows you to connect a headphone with a stereo mini-plug.2.Headphone volume dial

This volume dial allows you to control the volume of the headphone connected to the drive. Turning the dial to the left decreases the volume, turning to the right increases volume.

3.Status indicatorSingle Color LED (red)

This LED lights up when you place a disc on the drive tray. The LED flashes while data is being written on the disc (recording).

Two-color LED (red and green)

The green LED lights up when you place disc on the drive tray. The LED flashes while data is read from the disc.

The red LED flashes while data is being written on the disc (recording).4.Emergency eject pinhole

In cases when you cannot eject a disc from the drive using the eject button due to power failure or software problems, insert a pin or a paper clip into this hole to manually eject the tray and the disc.

5.PLAY/SKIP button

This button has two functions. If the drive is idle, pressing this button will start playing an audio disc (if one is currenly loaded in the drive) from the first track. While in the PLAY mode, pressing this button lets you skip to the next track on the disc.

6.STOP/EJECT button

This button has two functions. Pressing this button at any time ejects the disc tray so you can place or remove a disc. While in PLAY mode, pressing this button stops playing the disc loaded in the drive.

14

CRW-4012A User’s Manual