SETUP H/W .3
Settings Motherboard
3. HARDWARE SETUP
Motherboard Feature SettingsThe motherboard’s onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch’s posi- tion. The example below shows all the switches in the OFF position.
| 1. | Frequency Selection | ||||
| 2. | Frequency Selection | ||||
CUC2000 | 3. | Frequency Selection | ||||
| 4. | Frequency Selection | ||||
| 5. | Frequency Selection. | ||||
| ON |
|
|
| ON | |
| 1 | 2 | 3 | 4 | 5 | OFF |
|
| |||||
SW2
CUC2000 DIP Switches
1) JumperFree™ Mode (JEN)This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches (SW2) must be set to OFF.
| Setting | JEN |
|
|
|
Enable (JumperFree) |
|
|
| |
Disable (Jumper) |
|
|
| |
|
|
| JEN |
|
| Jumper | JumperFree | ||
|
|
| (Default) | |
| 1 | 2 | 2 | 3 |
CUC2000 |
|
|
|
|
ON
OFF
1 2 3 4 5
SW2
CUC2000 JumperFree™ Mode Setting
18 | ASUS CUC2000 User’s Manual |