3.HARDWARE SETUP
4)Automatic Timeout Reboot Setting (NO_REBOOT)The motherboard is set so that when the BIOS detects a hang (timeout) during bootup, the motherboard will automatically reboot. If rebooting is repeating in- effectively, set this jumper to No Reboot to disable
Normal |
| ||||||||
No Reboot | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SETUP H/W .3
Settings Motherboard
CUC2000 | NO_REBOOT |
1 | 2 | 2 | 3 |
Normal | No Reboot | ||
(Default) |
|
|
CUC2000 Reboot Setting
5)Onboard Audio CODEC Setting (AUD_EN1 / AUD_EN2) (available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump- ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card on any of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in this section). If using an ISA or PCI audio expansion card, On- board AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be disabled.
1 | 2 | 2 | 3 |
CUC2000 | SPK |
| SPK |
ADN# ADN#
AUD_EN1 AUD_EN1
AUD_EN2 AUD_EN2
Enable Disable (Default)
CUC2000 Audio Codec Setting
20 | ASUS CUC2000 User’s Manual |