Asus E2234 1.10.2 Internalconnectors, ess, ess, USB, USB, Ser, port, Coax, S/PD, AN act, Out port, 0 ports 3 and, 0 ports 1 and, AN antenna port

7. Wi rel ess LAN acti vi ty LED (P5NSLI/WiFi model only). The wireless LAN module comes with an activity LED. Refer to the table below for the LED indications.

Status	Description
ON	The wireless LAN module is on but has no data activity
OFF	The wireless LAN module is off
Flashing	The wireless LAN module is transmitting or receiving data or both.
	The wireless LAN module is scanning for available access point or another
	wireless device

8. Wi rel ess LAN antenna port (P5NSLI/WiFi model only). This port connects to the optional dipolar antenna for the onboard WiFi-g™ wireless solution.

9. USB 2.0 port 7 (P5NSLI/WiFi model only). This 4-pin Universal Serial Bus (USB) ports is available for connecting USB 2.0 devices.

10. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

11. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

12. Seri al port. This port connects a mouse, modem, or other devices that conform with serial specification.

13. Coaxi al S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable.

14. PS/2 keyboard port (purpl e). This port is for a PS/2 keyboard.

1.10.2 I nternal connectors

1. Fl oppy di sk dri ve connector (34-1 pi n FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.

FLOPPY

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

PIN 1

P5NSLI Floppy Disk Drive Connector

1-28 Chapter 1: Product introduction