2.6Jumper

Clear RTC RAM (CLRTC)

This jumper allows you to enable the CLRTC switch. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard clr CMOS switch helps you easily to clear the system setup information such as system passwords. See page 2-35 for details.

To erase the RTC RAM:

1.Turn OFF the computer and unplug the power cord.

2.Move the jumper cap from pins 1-2 (default) to pins 2-3 to enable the CLRTC function.

3.Press down the clr CMOS button and again to release it.

4.Plug the power cord and turn ON the computer.

5.Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.

The clr CMOS button will not function until the jumper cap on CLRTC is moved to the ENABLE position. Removing the cap will cause system boot failure!

STRIKER EXTREME

 

CLRTC_EN

 

 

 

 

 

 

1

2

2

3

STRIKER EXTREME

Normal

Clear RTC

(Default)

 

 

Clear RTC RAM

 

 

 

 

•Make sure to re-enter your previous BIOS settings after you clear the CMOS.

•You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.

•To prevent accidental pressing of the Clear CMOS switch, the CLRTC jumper default setting disables the switch.

ASUS Striker Extreme

2-21